How to change Hard Disk Drive Letters and Path : Remove current drive letter

Posted: 17 Jun 2010 04:27 AM PDT

Have you ever been changed the drive letters of your hard disk to different one ? It is very simple to change the current hard disk drive letter to a different letter. You don't need any third party applications for this. You can change the drive letter from computer management window.

Assign Different letter to computer hard disk drive

To assign different drive letter by removing the current letter, follow the steps below.

1. Right click on My Computer

Change hard disk drive default letter and name

2. Click on Manage

3. Click on Disk Management

Disk Management is under Storage. Now you can see all the drives in your computer.

Change drive letter from disk management

4. Right click on a drive and click on Change Drive letters and Path

Note: You cannot change the drive letter of your booting drive.

5.Click on Change button

Now you will get an option to select any letter from current letter for the current drive.

You can select any letter from the drop down menu for your hard drive.

Related Topics

1. How to protect your computer from over heating issues

2. Cannot Start my computer - Disk Boot Failure

3. How to Check frequency and other details of RAM

4. Forgot BIOS password - BIOS password recovery

5. How to increase my Laptop battery life

Technology Blog

WA3002 -g1 UTStarcom ADSL Modem (BSNL Type 2 Modem) Internet Configuration

Posted: 16 Jun 2010 10:44 PM PDT

WA 3002 -g1 ADSL Modem ( UTStarcom) belongs to BSNL type 2 modem category. It has both Ethernet connection as well as wireless feature. It means you can connect one computer to the modem using Ethernet cable and other computers in WLAN. This tutorial is about configuring Internet connection in WA 3002 -g1 ADSL Modem (BSNL Type 2 Modem). If you are looking for configuration steps of BSNL Teracom modem click on the link below.

Configure Internet in BSNL Teracom Modem

For Assistance in setup Wireless network in BSNL modem click on the link below.

Setup BSNL Teracom Modem Wireless and Security

Setup BSNL Type 2 Modem (WA3002 -g1 UTStarcom)

To setup WA 3002 -g1 ADSL Type 2 BSNL modem follow the steps below.

1. Connect BSNL modem to computer

Connect the LAN port of the BSNL type 2 modem to the computer using an Ethernet cable and power on the modem.

2. Login to BSNL modem (WA 3002 -g1 UTStarcom)

Type 192.168.1.1 on the address bar of your web browser and press enter. Now on the login window type the following details.

User Name: admin
Password : admin

Now press enter.

3. Click on Advanced Setup

Now you can see the setup page of WA3002 BSNL Type 2 modem.

4. Click on Advanced Setup

Now click on advanced setup tab of WA3002 modem configuration page to see all connections made in the modem.

5.Edit VPI settings of PPPoE connection in WA3002 BSNL Modem

Click on Edit button opposite to the PPPoE and Enter the following details.

VPI = 0
VCI = 35

Enter VCI and VPI details in WA3002 BSNL Modem connection

After entering the details click on next.

6. Select PPPoE from the list of network protocols

select the network protocol as PPPoE in WA3002 UTStarcom BSNL Modem

Now select the network protocol as PPPoE and click next.

7. Enter the user name and password provided by BSNL

Here you should enter the data one user name and password provided by BSNL. After entering all the details save settings.

8. Click Management and choose Save/Reboot WA 3002 -g1 ADSL BSNL Modem

After finishing the Internet configuration in WA3002 -g1 ADSL Modem ( UTStarcom), we need to reboot it. To reboot WA3002 UTStarcom ADSL Modem click on Management and click Save/Boot.

Now wait for one minute to modem back.

Related Articles

1. How to Setup Belkin Wireless Router

2. Modem is not online and cannot go online

3. Ping gives hardware error - solutions

Technology Blog

Technology Information

New & Update

About Me

Labels

Blog Archive

3D TV Post, Are we there yet?

3D TV Post, Are we there yet?